Busy

We can carry out the work for you from A to Z. This includes removing the instrument, calibrating it, reinstalling it and putting it into operation. Where installation and environmental conditions permit, we can also perform a field calibration, for which we will connect our mobile calibration equipment to the instrument to be calibrated.

We calibrate pressure instruments from -1 to 250 bar. This can be done both on-site and in-shop. We will agree with you in advance whether and when adjustments may be made

Instruments that we calibrate:

· Pressure transmitters

· Pressure switches

· Manometers

Finally, we can perform a walk test and function test with you to check whether the instrument is correctly connected to your operating system.

In consultation with you, we can also carry out a visual ATEX check, whereby we register the ATEX data of the instrument, check whether the instrument in question is permitted in the ATEX zoning specified by you, the correct glands and cables have been used, there is an external earthing. is necessary and we assess whether the overall condition of the instrument still meets the requirements.

By using a checklist, we continuously check during our work whether we have skipped a step.

You will of course receive the report at the end of the work.